1 reply to this topic

[UPSTATE]

I have a customers machine a Muratec 1330, that jams in the right side of copier seemingly befor the fuser. Question, there is a set of registration rollers, that slides in elongated slots that can move aleast 1/4 inch. If anyone works on this machine they will know what I am talking about. Is this normal or should these registration rollers have a bushing or bearing holding them in place. Thanks ahead of time............

[simons]

if the machine has alot of pages on it. Take off the back cover and swap the manual feed clutch with the reg clutch. That will cure these james that are not because of worn tires or a media problem.