12 replies to this topic

[impaqsol]

Need procedure to install firmware for this Toshiba E-Studio 450 copier. Already have firmware. I'm new to toshiba copiers.

Thanks in advance for your help.

Thanks,
Rad

[alien1965]

Which version is on the machine and which version do you have?
Is this the full zip or just the update file?
The full zip will have a pdf with the instructions in it.

[impaqsol]

Thanks for responding so fast, the firmware that I have was giving to me, but no PDF file on it.

They gave me for all toshiba models, but it seem that it's updated.

Really don't know this copier to much, but basics.

I change HDD because machine did not came out of "WAIT WARMING" someone suggested to change HDD.

Need help.

Thanks

[lostintexas]

Place the correct files on a compatible thumb drive and turn the machine on in upgrade mode.

It may take a few seconds for the screen to change and you can then choose the option to upgrade.

[impaqsol]

What is the procedure to enter in upgrade mode.

[alien1965]

1 male sure the files are for the copier in question if not you will need a system pwb to recover the error.
2 install files on to a 512mb (or less) thumb drive in the root directory
3 hold clear and 3 down while turning on the copier then select option 3
4 turn off copier
5 insert the thumb drive into the usb port above the nic card (behind a plate or remove the print/scan enabler and use that port)
6 power on while holding 4 and 9
7 watch screen for up to 5 minutes
8 when the update screen comes up make sure the * is next to all options and press start. If the * is not there then press the number next to that opition.
9 got take lunch and come back in 20 minutes.
10 if anything fails you will need to replace that pwb.
11 power off and remove the thumb drive
12 power on in 08 mode and run 947 initialize then 690 start 2 enter(on screen)
13 power off then on..:realmad::realmad::realmad::realmad:

[impaqsol]

Alien1965, the copier give me a "INFALTE ERROR, PLEASE CHANGE USB STRAGE". I'm beginning to think that the firmware is not complete or not correct. Because I just used ours same intructions for a Toshiba E-Studio 352 that has the same problem and everything went smooth on the instalation.

Do you have correct firmware for the Toshiba E-Studio 450.

Please advise.

Thanks,
Rad

[alien1965]

Make sure the thumb drive is format in fat not fat32. The e352 will take it either way but the 450 will only use fat.
Also the firmware is not the same for both of these machines.

[impaqsol]

I've done all the procedure now on the Studio 352 also and now since i can't press all buttom on the display (can't do the 690) now this model stays in "Wait Warming Up" and "Network Initializing" could it be because I can't do the do this last procedure.

Please Help going crazy here!!!!!!!!!!

Thxs,
Rad

[alien1965]

08-693 then touch the dots. Then try the install

[mummim]

Hi Impaqsol!

when you update complete you must do
08-947
08-693
08-690 2
done!
gl.

impaqsol said:

I've done all the procedure now on the Studio 352 also and now since i can't press all buttom on the display (can't do the 690) now this model stays in "Wait Warming Up" and "Network Initializing" could it be because I can't do the do this last procedure.

Please Help going crazy here!!!!!!!!!!

Thxs,
Rad

[Azaz Hassan]

i am having a problem with my estudio 352 as it remain in wait for warming up for a long period and if it become ready it print 1 copy and then coping still remain on lcd any one could help me gettin out of this some one said that it is a problem of firmware update it so i want firmware file from where i can get those plese send if any one have my email is


azaz_hassan790@yahoo.com

thank .....

[24dude]

here are instructions but your on your own for firmware

Attached Files

•  UpdateInstructions.pdf   32.65K   12 downloads