6 replies to this topic

[Tucson]

I am looking for tested and working Toshiba 7560 analog copier controler boards.
tom@rkamail.com

[jpcopy]

which boards are you looking for? i have a 6560 in back that works and the motor control board is the same as the 7560. I think most of the boards will exchange but the mainboard won't so let me know which boards

[Tucson]

I am looking for the board that controles the charge on the drum.
I have had the drum replaced and it worked perfectly. It tripped a breaker and now after it warms up on half of the drum it has excess toner. My tech swaped the drum end to end and still the same result. We sent in the smaller of the 2 boards in for repair but still the same result.
Please advise.
Thanks.
Tom

[jpcopy]

is your blanking lamp coming on. check the wireing on the blanking lamp. they were bad about breaking. also ck the ends of blanking lamp on front side. had a starter that would get dirty. but you say it trip a breaker so could be the wires going to lamp. so of the things on the 6560 will fit the 7560 but charge is totaly different

[Tucson]

Thanks for the advice. My tech tells me he has checked these items and the board that charges the drum needs to be replaced with a proven working board.
Any advice on where to locate a working board?

[lkrsardis]

Tryhttp://hytecrepair.com

[Tucson]

Thanks, but they do not work on this model anymore.